I was just thinking of another project for myself with the ME locomotives...
Since we have EA multipacks, is anyone intersted in some ME multipacks?
I have already re-painted the 5 original ME locomotives, but now I might be able to make 'super' multi packs with all the MEs, as follows:
1. Original Design Multipack (1501-1517)
2. Modern/VIA Design Multipack (1509, 1511, 1518-1537)

The Original Design pack would not take very long (unless evry locomotive should have different 'dirt' etc.). The VIA design pack would have a new blue version (if I can make a better one), and the current red (1509) version.
I would have to come up with different names for 1502, 1511 and 1524 though (or leave them out).
If I can find any MZ4's to photograph when I am in Denmark in August, I may do a few repaints of those in 'fotoreal' style, unless HEC has a huge MZ multipack for the new cab/sound upload?

Hej Jens!!

JA! Det ville være cool, hvis du ville lave sådan en pakke! Jeg ville ha' stor interesse for det, også for MZ

det vil faktisk værer en super god ide rigtig cool ide egentlig

It's also a lot of work... there are 37 ME locomotives, in 4 variations (red/black, red/black (more red), red with blue, blue with red). I think I will make about 8 'base' repaints.
1537 will be repainted to blue (if people still want a red/black 1537 I can make the blue one a non-elvarme version so there are 2). I will post my paint list later...

OK, here's my repaint list:

Original Design:
1501 - new/clean (1st painting style)
1512 - new/clean (2nd painting style)
1503 - preserve + use as basis for batch (1st painting style)
1537 - use as basis for batch (2nd painting style) - change to VIA design
1514 - replacement of 1537 (finished already)
1517 - dirty (hybrid of 1505 and 1537)

VIA/Modern Design:
1518 - clean/new paint
1537 - repaint of old 1537
1530 - dirty 1
1531 - use as basis for batch
1523 - dirty 2

So... 3 "Original Design" (OD) MEs are ready, and the "Modern Design" (MD) ones have not been started yet...

hey jens.... det lyder godt

super Jens.

So... I have finished the first "batch" - 1502, 1504, 1506, 1507, 1508 (based on 1503).

Does anyone know of any coupling .s files for freightanim on the front of the ME's?

Til download på tog-sim.dk?

If I understand you correctly, then yes, as usual all my projects will get uploaded here and on ts-ef.com.
The "Original Design" pack will not take very long to finish (it's just getting eng/s/sd files sorted that takes time!). I will see what I can do with the "Modern Design" when I get back from Denmark in August.
Is the blue/red ME design also called VIA (like the IC3/IR4 design)?

VIA-designet er - hvis jeg har forstået det rigtigt - kun brugt på togsæt.

jeg ved godt hvad han mener... Via design pakken skulle komme til at indholde ME'erne med Rød/Blå og Blå/rød farve ik?... altså det to ME 1509 og 1511 plus de ME'er der har Blå farve med Røde Vingehjul ( altså 1518 - 1537 ) Ik sandt?

Det forstår jeg ikke. Det er jo en ME-pakke som Jens er ved at lave og ikke en VIA-pakke.

I'll refer you to your own topic: http://www.tog-sim.dk/PNphpBB2-viewto...t-via.html

I am now thinking of releasing two "Original Design" MultiPacks as addons to the latest "Minipack". This is because the "Original Design" was different between 1501-1509 and 1510-1537 (25cm red paint difference).
Pack 1: 1501, 1502 (elvarme), 1504, 1506, 1507, 1508
Pack 2: 1510, 1512, 1513, 1514, 1515, 1516, 1517

Both Packs will require my 1503-1505-1537 "minipack" for cab/sound (that minipack has a few wav files added).

There are no changes to 1503 and 1505 so I won't upload them again. The existing 1537 will remain as an "Original Design" elvarme version, and the non-elvarme version will be blue/red. (1502, 1511, 1524 and 1537 will all have elvarme versions; the existing versions will NOT be overwritten)

Hej Jens
Jeg kan ikke se sammenhængen mellem mit spørgsmål om VIA og ME, men det kan være at jeg misforstår...

Jeg mener i hvert fald at VIA-designet indtil videre kun er benyttet på togsæt (IC3, MR/MRD, IC4 og måske nogle flere samt dobbeltdækkervognene) men VIA-designet har ikke været benyttet på ME-lokomotiverne, heller ikke selv om ME benyttes til at trække dobbeltdækkerne.

Here is a screenshot of ME 1501, which is slightly different to the others. I have decided to make ME 1508 another "goods-friendly" locomotive, so it will be based on ME 1505.

det er bare flot Jens jeg glæder mig ufattelig meget til at kører lidt i dem

All of the first pack is about ready (I just need to pack it in to an installer and make some AI files and consists). It should be uploaded on Wednesday.
Does anyone mind me uploading in smaller sets of locomotives? It makes it a bit easier for me! (After OD pack 2 it will be: MD pack 1: ME1509 + 1511. MD pack 2: 1518-1527. MD pack 3: 1528-1537)

Helst ikke bruge den installer der giver problemer med Norman antivirus, please :-!

I never use ClickTeam; I upgraded to QSetup 6 for the last project (ME1503/5/37) which has proper multi language support .

All of the ClickTeam installers on TS-EF.com are not very useful for me because they try to install to the wrong place! :cry: BUt they compress better than QSetup, so I use a RAR file (or RAR SFX) to upload my projects.